The document provides information about MIP AG's products and systems for automotive painting and refinishing. It discusses Mipa WBC, a water-based basecoat mixing system, and Mipa's clearcoats which offer improved scratch resistance. It also outlines Mipa's painting systems for commercial vehicles and industrial applications, including Mipa PUR HS and Pro Mix tinting systems. The document promotes MIP AG as a supplier of automotive coating products and mixing systems that allow any desired color to be produced.
Embraco is a global leader in compressor technology and manufacturing. They have over 400 people dedicated to R&D across 3 continents, hold 862 patents globally, and have an annual compressor manufacturing capacity of over 30 million units. Embraco focuses on developing natural refrigerant compressors using propane (R290), isobutane (R600a), and carbon dioxide (R744/CO2). They have been a pioneer in alternative refrigerant technology since 1993 and now produce compressors using these natural refrigerants at multiple manufacturing sites around the world.
Welcome to this 10th anniversary edition of WIPAC Monthly, the magazine brought to you by Water Industry Process Automation & Control.
This edition is somewhat of a double edition featuring some of my favourite articles over the past five years and the content that goes into each edition. I won't spoil people's surprise at the articles that are in this edition,
Enjoy and have a good month,
Oliver
Mipa has developed a new water-based basecoat system called Mipa WBC that meets legal VOC requirements while avoiding disadvantages of previous water-based systems. Mipa WBC offers easy application, reliable colors, high efficiency and material savings compared to conventional systems. It is part of Mipa's complete product line for professional automotive refinishing that focuses on water-based technologies for the future of the industry.
Mipa Vicrom is a basecoat that creates a chrome-like mirror effect surface. It is intended to coat rims, trim, and other parts. To protect against weathering and mechanical stress, the surface should be recoated with Mipa 2K clearcoats. Mipa Vicrom has a mixing ratio for ready to spray use and can be thinned if needed. It is applied in thin, uniform layers with a spray gun at low pressure to achieve the best mirror effect.
Embraco is a global leader in compressor technology and manufacturing. They have over 400 people dedicated to R&D across 3 continents, hold 862 patents globally, and have an annual compressor manufacturing capacity of over 30 million units. Embraco focuses on developing natural refrigerant compressors using propane (R290), isobutane (R600a), and carbon dioxide (R744/CO2). They have been a pioneer in alternative refrigerant technology since 1993 and now produce compressors using these natural refrigerants at multiple manufacturing sites around the world.
Welcome to this 10th anniversary edition of WIPAC Monthly, the magazine brought to you by Water Industry Process Automation & Control.
This edition is somewhat of a double edition featuring some of my favourite articles over the past five years and the content that goes into each edition. I won't spoil people's surprise at the articles that are in this edition,
Enjoy and have a good month,
Oliver
Mipa has developed a new water-based basecoat system called Mipa WBC that meets legal VOC requirements while avoiding disadvantages of previous water-based systems. Mipa WBC offers easy application, reliable colors, high efficiency and material savings compared to conventional systems. It is part of Mipa's complete product line for professional automotive refinishing that focuses on water-based technologies for the future of the industry.
Mipa Vicrom is a basecoat that creates a chrome-like mirror effect surface. It is intended to coat rims, trim, and other parts. To protect against weathering and mechanical stress, the surface should be recoated with Mipa 2K clearcoats. Mipa Vicrom has a mixing ratio for ready to spray use and can be thinned if needed. It is applied in thin, uniform layers with a spray gun at low pressure to achieve the best mirror effect.
MP ProtectiveHalfMask-Box Reusable is a reusable half mask for use in paint shops. It is made of a flexible, lightweight plastic that provides maximum comfort while complying with European and US safety standards. The mask comes with two each of filters for organic gases/vapors and particles, as well as mounts for adding extra filters. Replacement filters can also be purchased.
This document provides product information for Mipa Ziehspachtel PL10, a two-component long-term paste filler based on unsaturated polyester resins. It is suitable for repairing larger body areas on vehicles and machinery. The putty has a fine grain and can be applied in thin layers. It has a long pot life and is heat resistant up to 180°C. The document describes the product's applications, mixing instructions, drying times, and safety precautions.
MP FineLineTape is a masking tape suitable for multi-color and design painting. It produces almost no edges during painting due to its extremely thin material of 0.12mm. It adheres well to different substrates and can be used for several successive drying processes up to 120°C without needing to remask. The special carrier material ensures perfect results when properly used, including for water-based paints. It is available in 55m rolls in widths of 3mm, 6mm, 9mm and 12mm.
MP Polierteller offers backing pads in various sizes that work with MP polishing foams and pads to achieve a perfect surface finish on vehicles. The backing pads and unique MP ONE-STEP Super-Polish agent allow users to polish out trapped dust and remove scratches in a single process when used together. The document provides technical details and item numbers for three backing pad sizes available for purchase.
MP ONE-STEP Super-Polish is a one-step polish that can remove traces of spray dust, spraying transitions, and sanding traces in one operation. It allows polishing after fine sanding with P1500-P2000 paper without leaving holograms. Paint defects can be removed and the product easily wipes away without residue, providing a perfect finish for paint surfaces. The polish is silicone-free with aluminum oxide and suitable for scratch-resistant nano coatings.
The MP Polierer Electronic is a compact, ergonomic electric polishing machine. It features a rotary speed selector and high torque motor for perfect work without fatigue. A 6x microprocessor electronic ensures constant power transfer without loss of performance or risk of burning. It is optimized for use with MP polishing pads and the MP ONE-STEP Super-Polish compound to achieve high quality surface finishes.
This document discusses coatings and surface treatments from Mipa. It notes that surface quality makes an important first impression, and that customers expect damage-free surfaces. It then summarizes Mipa's products for spot repair and coatings, including their aerosol and mixing systems that can produce thousands of color shades. The document highlights Mipa's coatings for sports equipment and aircraft to protect against weathering while allowing flexibility or conductivity as needed.
This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
1) The document provides product information for Mipa 2K-Plastic-Grundierfiller, a fast drying primer-surfacer that adheres directly to various plastic materials used in automotive applications.
2) It can be used as both an adhesion promoter and filler in a single application and allows wet-on-wet application with all 1K and 2K paints.
3) The primer has a pot life of 4-5 hours, dries to dust in 25-30 minutes at 20°C object temperature, and achieves full hardness within 60-70 minutes at 20°C or 20-30 minutes at 60°C object temperature.
This document provides a safety data sheet for Mipa 1K-Fastfiller grau, a knife filler and surfacer. It lists the product ingredients and identifies those that are hazardous, including xylene, butan-1-ol, ethanol, n-butyl acetate, ethyl acetate, bisphenol, phosphoric acid, and solvent naphtha. It also provides handling guidelines, protective equipment recommendations, and emergency procedures for accidental release. The product contains flammable and hazardous materials and proper precautions should be taken when using it.
Mipa 1K-Fast-Filler is a 1K repair filler for automotive use that has excellent filling power. It can be applied to sanded old paint layers, shop primers, and directly to steel. It sands and dries quickly, saving time. It is chromate and lead free. It sprays easily at a viscosity of 18-22 seconds and dries fully hard in under an hour when applied at a thickness of 40-50 microns. Proper thinning and application conditions ensure best performance.
This safety data sheet provides information on the product Alu-Chrom Spray. It lists the product ingredients including ethyl acetate, propane, xylene, butane, isobutane, and aluminium powder. It describes the product as an aerosol containing flammable and irritating components. The document provides handling, storage, exposure, and disposal guidance to minimize health and environmental risks.
This document provides a safety data sheet for product A 40, describing:
1) The product and company details
2) Hazards associated with the product including flammability and potential to cause skin/eye irritation or drowsiness
3) The main ingredients in the product and their hazards
4) First aid measures, firefighting measures, and accidental release measures
Mipa A 40 1K-Acrylspachtel is an acrylic-based filler for levelling minor irregularities, scratches and pores on primer or filler surfaces. It can also be used on fiberglass and old coatings. It applies in thin layers and can be recoated with most paint systems. The document provides product information on the filler including its color, application methods, drying times, and VOC content which is below the EC limiting value. It also notes application and processing conditions and states the product should be disposed of according to environmental regulations.
Mipa Alu-Chrom-Spray is a high quality heat resistant aluminium coating for metal substrates like exhaust systems. It provides anti-corrosive protection and is conductive, making it suitable for spot welding. The coating is heat resistant up to 800°C and highly resistant to acids and lyes. It requires pre-cleansing with a silicone remover and should be applied in 1-2 thin coats at a distance of 20-30cm, with 1-2 minutes between coats. The coating dries within 10 minutes and reaches full hardness after 24 hours.
This safety data sheet provides information on the product P 911. It identifies the product, supplier, hazards, composition, and safety precautions. The product contains styrene which is harmful if inhaled, irritating to eyes and skin, and flammable. The sheet provides guidance on handling, storage, exposure controls, firefighting measures, accidental release measures, transport, and disposal.
MP ProtectiveHalfMask-Box Reusable is a reusable half mask for use in paint shops. It is made of a flexible, lightweight plastic that provides maximum comfort while complying with European and US safety standards. The mask comes with two each of filters for organic gases/vapors and particles, as well as mounts for adding extra filters. Replacement filters can also be purchased.
This document provides product information for Mipa Ziehspachtel PL10, a two-component long-term paste filler based on unsaturated polyester resins. It is suitable for repairing larger body areas on vehicles and machinery. The putty has a fine grain and can be applied in thin layers. It has a long pot life and is heat resistant up to 180°C. The document describes the product's applications, mixing instructions, drying times, and safety precautions.
MP FineLineTape is a masking tape suitable for multi-color and design painting. It produces almost no edges during painting due to its extremely thin material of 0.12mm. It adheres well to different substrates and can be used for several successive drying processes up to 120°C without needing to remask. The special carrier material ensures perfect results when properly used, including for water-based paints. It is available in 55m rolls in widths of 3mm, 6mm, 9mm and 12mm.
MP Polierteller offers backing pads in various sizes that work with MP polishing foams and pads to achieve a perfect surface finish on vehicles. The backing pads and unique MP ONE-STEP Super-Polish agent allow users to polish out trapped dust and remove scratches in a single process when used together. The document provides technical details and item numbers for three backing pad sizes available for purchase.
MP ONE-STEP Super-Polish is a one-step polish that can remove traces of spray dust, spraying transitions, and sanding traces in one operation. It allows polishing after fine sanding with P1500-P2000 paper without leaving holograms. Paint defects can be removed and the product easily wipes away without residue, providing a perfect finish for paint surfaces. The polish is silicone-free with aluminum oxide and suitable for scratch-resistant nano coatings.
The MP Polierer Electronic is a compact, ergonomic electric polishing machine. It features a rotary speed selector and high torque motor for perfect work without fatigue. A 6x microprocessor electronic ensures constant power transfer without loss of performance or risk of burning. It is optimized for use with MP polishing pads and the MP ONE-STEP Super-Polish compound to achieve high quality surface finishes.
This document discusses coatings and surface treatments from Mipa. It notes that surface quality makes an important first impression, and that customers expect damage-free surfaces. It then summarizes Mipa's products for spot repair and coatings, including their aerosol and mixing systems that can produce thousands of color shades. The document highlights Mipa's coatings for sports equipment and aircraft to protect against weathering while allowing flexibility or conductivity as needed.
This document provides safety information for a 2K-Plastic-Grundierfiller product. It contains hazardous chemicals including xylene, ethyl acetate, and solvent naphtha. The product is highly flammable and harmful if inhaled, in contact with skin, or if swallowed. It can cause irritation to eyes, skin, and respiratory tract. In the event of contact, remove contaminated clothing and rinse area with water. Seek medical help if symptoms persist. The product requires proper storage and handling to prevent fire or exposure.
1) The document provides product information for Mipa 2K-Plastic-Grundierfiller, a fast drying primer-surfacer that adheres directly to various plastic materials used in automotive applications.
2) It can be used as both an adhesion promoter and filler in a single application and allows wet-on-wet application with all 1K and 2K paints.
3) The primer has a pot life of 4-5 hours, dries to dust in 25-30 minutes at 20°C object temperature, and achieves full hardness within 60-70 minutes at 20°C or 20-30 minutes at 60°C object temperature.
This document provides a safety data sheet for Mipa 1K-Fastfiller grau, a knife filler and surfacer. It lists the product ingredients and identifies those that are hazardous, including xylene, butan-1-ol, ethanol, n-butyl acetate, ethyl acetate, bisphenol, phosphoric acid, and solvent naphtha. It also provides handling guidelines, protective equipment recommendations, and emergency procedures for accidental release. The product contains flammable and hazardous materials and proper precautions should be taken when using it.
Mipa 1K-Fast-Filler is a 1K repair filler for automotive use that has excellent filling power. It can be applied to sanded old paint layers, shop primers, and directly to steel. It sands and dries quickly, saving time. It is chromate and lead free. It sprays easily at a viscosity of 18-22 seconds and dries fully hard in under an hour when applied at a thickness of 40-50 microns. Proper thinning and application conditions ensure best performance.
This safety data sheet provides information on the product Alu-Chrom Spray. It lists the product ingredients including ethyl acetate, propane, xylene, butane, isobutane, and aluminium powder. It describes the product as an aerosol containing flammable and irritating components. The document provides handling, storage, exposure, and disposal guidance to minimize health and environmental risks.
This document provides a safety data sheet for product A 40, describing:
1) The product and company details
2) Hazards associated with the product including flammability and potential to cause skin/eye irritation or drowsiness
3) The main ingredients in the product and their hazards
4) First aid measures, firefighting measures, and accidental release measures
Mipa A 40 1K-Acrylspachtel is an acrylic-based filler for levelling minor irregularities, scratches and pores on primer or filler surfaces. It can also be used on fiberglass and old coatings. It applies in thin layers and can be recoated with most paint systems. The document provides product information on the filler including its color, application methods, drying times, and VOC content which is below the EC limiting value. It also notes application and processing conditions and states the product should be disposed of according to environmental regulations.
Mipa Alu-Chrom-Spray is a high quality heat resistant aluminium coating for metal substrates like exhaust systems. It provides anti-corrosive protection and is conductive, making it suitable for spot welding. The coating is heat resistant up to 800°C and highly resistant to acids and lyes. It requires pre-cleansing with a silicone remover and should be applied in 1-2 thin coats at a distance of 20-30cm, with 1-2 minutes between coats. The coating dries within 10 minutes and reaches full hardness after 24 hours.
This safety data sheet provides information on the product P 911. It identifies the product, supplier, hazards, composition, and safety precautions. The product contains styrene which is harmful if inhaled, irritating to eyes and skin, and flammable. The sheet provides guidance on handling, storage, exposure controls, firefighting measures, accidental release measures, transport, and disposal.
1. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Messe Frankfurt Search MIP AG
A A A Print Recommend
Welcome
About Automechanika MIPA AG
Exhibitors and products Company Product data Contact
Automechanika Events
T product overview
o
Visiting Automechanika
Exhibition grounds Mipa WBC
Arrival and stay product description
What's on in Frankfurt Mipa WBC in new shape
With new containers and a further quality improvement
News Mipa WBC presents itself as the new top product amongst
Automechanika waterbased basecoats.
worldwide
On the Automechanika 2004 MIP presents the second generation of
A
the waterbased basecoat-mixing-system MIP WBC. The significant
A
advantages of the first version are now combined with the latest
knowledge of research and development and result together in a top product for the
future of car refinishing.
The mixing tinters are unchanged by number and still available in 0,5 ltr.-
and 1 ltr.-containers depending on the usage of the relevant tinter. The new packaging
however, are plastic bottles which are easy to handle and which can be closed very
tightly.
After the first opening of the sealing cap the special Mipa WBC dosing lids can be
screwed on.
With 10-20 % Mipa WBC Thinner the formulations, which are mixed corresponding to
Mipamix 4 Win, are adjusted ready to spray. For a further „fine-tuning“ of the drying
times Mipa WBS Accelerator and Mipa WBS Retarder are available as additives.
The new quality can be applied with a very smooth surface and without clouding. The
curing and drying times of Mipa WBC are still very short compared to most other
common waterbased products on the market.
For a final perfection of the colour, a dust coat is absolutely necessary.
For the new containers of Mipa WBC a new Mipa WBC storage shelf has been created.
It is planned for a maximum of 70 containers and therefore spaceous enough for the
future. Already in the standard version there is the possibility to store one extra tin per
tinter behind the tin in use.
The innovative power behind the renovation of Mipa WBC opens the way into the future
of waterbased basecoats. The existing good basis of the first generation has been
used for a significant improvement.
2. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Messe Frankfurt Search MIP AG
A A A Print Recommend
Welcome
About Automechanika MIPA AG
Exhibitors and products Company Product data Contact
Automechanika Events
T product overview
o
Visiting Automechanika
Exhibition grounds Autolacke
Arrival and stay product description
What's on in Frankfurt Systematic Success
News The colour spectrum of international automotive painting
Automechanika comprises more than 50,000 different shades, and
worldwide hundreds more are added each year through adjustment to
customer tastes and new pigment technologies. Due to the
international availability of almost every vehicle brand,
practically every colour nuance can be found on cars in
every corner of the Earth.
Only through complex mixing systems is it possible to supply each of these colour
shades
- precisely,
- promptly and
- in any amount,
on an international basis. With Mipa car refinishing paint systems, any desired
shade can be produced according to customer wishes using only a few basic
components and computer-assisted formulas. The requirements for the success
of these mixing systems include exercising the highest precision in the production of
the basic components as well as in the generation of formulas.
Depending on the area of application and sales region, a variety of Mipa mixing systems
can be employed. Due to restrictive solvent laws, the high solid and waterbased
technology has become prevalent in Europe. In comparison, more compact systems
suffice for the commercial vehicle sector, since the colour selection in this segment is
smaller. MIP even has a separate system for its historical roots of automotive painting
A
– for the agricultural and construction vehicle sector.
Quality Made in Germany
Sandstorm or perpetual frost – around the world, automotive paints are relentlessly
exposed to all kinds of environmental factors. In order to prevent a vehicle from
depreciating due to environmental influences, the paint must resist damage and
destruction by these adverse conditions.
This demand on car paints must be met. That is why MIP AG relies on a consistent
A
quality policy, beginning with the selection of the raw materials and culminating in
customer satisfaction. MIP produces all of its car coating products itself, meaning that
A
they can be perfectly coordinated with one another. Because it is not only the topcoat
that determines durability and appearance of automotive coating; all products play an
important role. Any desired colour can be produced with Mipa car refinishing paint
systems.
3. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Messe Frankfurt Search MIP AG
A A A Print Recommend
Welcome
About Automechanika MIPA AG
Exhibitors and products Company Product data Contact
Automechanika Events
T product overview
o
Visiting Automechanika
Exhibition grounds Klarlack
Arrival and stay product description
What's on in Frankfurt Beware of scratches
News
Automechanika Mipa 2K-HS-Clearcoat CSR contains very small
worldwide nano-particles, which im-prove the hardness of
the surface significantly. By mixing with Mipa 2K-
HS-Hardener HSR a VOC-value of less than 420
g/ltr. is reached. The high solid content of the
product allows for significant savings in time and
material consumption. Further infor-mation can be received from our Mipa technicians
any time.
The full resistance of the product is reached after minimum 30 minutes drying at 80° C
object temperature. Next to its scratch resistance the clearcoat shows an “Easy-to-
Clean-surface”, which nearly reaches anti-graffitti-quality. Soft pens or other dirt can
easily be removed.
A different way is taken by Mipa 2K-HS-Clearcoat CS 85. The product, which is
VOC-compliant in the cate-gory “special products”, features the so-called reflow-
technology. Scratches in the fully cured clearcoat-surface are closing themselves
under the influence of heat such as sun beams and therefore are self-curing. The
product is ready to spray after mixing with Mipa 2K-HS-hardeners and needs no special
drying conditions in order to develop its full effect.
Independent tests have confirmed the effect of both clearcoats even against
competitive products. Depending on the technical and economic conditions one can
choose between the products, which both show a significantly higher scratch
resistance compared to conventional clearcoats.
Even pigmented 2K-top coats with improved scratch resistance are possible, however
are rather suited for industrial applications.
Our Mipa technicians are available for further information at any time.
4. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Messe Frankfurt Search MIP AG
A A A Print Recommend
Welcome
About Automechanika MIPA AG
Exhibitors and products Company Product data Contact
Automechanika Events
T product overview
o
Visiting Automechanika
Exhibition grounds Paint system for Commercial Vehicles
Arrival and stay product description
What's on in Frankfurt Established Paint system for Commercial Vehicles now
even better
News
Automechanika As a successor of the established paint system Mipa PUR for
worldwide commercial vehicles Mipa will present on the Automechanika 2006
in Frankfurt the newly developed system Mipa PUR HS, which will
be complaint to the European VOC-limits.
As one can guess from the name the experiences of the long-
term successful system are the basis for Mipa PUR HS. With a small number of mixing
tinters the system will cover the complete spectrum of solid colours for commercial
vehicles. Colour systems such as RAL, NCS, British Standard, truck colours of all
common brands, fleet colours and colours of agricultural and construction machines will
be available.
Mipa PUR HS can be applied in different hardener combinations. The well-known 2:1
ratio with Mipa MS-Hardeners is ideal for the manual application by spray-gun. The use
of concentrated HS- or even VHS-Hardeners allows for an adjustment of the system to
automated 2K-applicators, airless paintwork or spraying robots without having to
change the paint itself. All combinations result in a VOC-value of less than 420 g/ltr. if
the thinner addition is kept according to the product information.
The high solid content of Mipa PUR HS makes significant savings in material and time
consumption possible. With an excellent flow, durable gloss and highest resistance
values costs can be actively reduced and at the same time quality of the paintwork can
be increased.
Mipa PUR HS is compatible with all established Mipa commercial vehicle product and can
even be used with water based Mipa primers.
An innovation as well is presented with the new Mipa PUR 2K-HS-Chassispaints with a
VOC-value of less than 420 g/ltr. In application identical to Mipa PUR HS as described
earlier the chassis paint is available ready mixed in standard colours and is designed
for the paintwork on vehicle chassis with an attractive price level.
These new products as well as the combination with all by-products are shown to the
user in specialized seminars in the Mipa Training Center in Essenbach. The introduction
of the products at the customer is guided on-site by the Mipa technicians.
5. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Messe Frankfurt Search MIP AG
A A A Print Recommend
Welcome
About Automechanika MIPA AG
Exhibitors and products Company Product data Contact
Automechanika Events
T product overview
o
Visiting Automechanika
Exhibition grounds Pro Mix
Arrival and stay product description
What's on in Frankfurt Unlimited Custom-Made Variety
The industrial paint sector is vast. Depending
News on classification characteristics such as
Automechanika binder basis of the products, type of surface
worldwide to be coated, size of the coating plant and
object to be coated, as well as many others,
industrial paints are categorized in a number of
sub-sections.
Mipa industrial paints are primarily developed for a variety of metal and plastic
surfaces. In this realm, MIP AG offers a wide palette of individual products and
A
services. Depending on company size, technology employed, objects to be coated and
the required stabilities, MIP always finds an optimal overall concept. This is done in the
A
context of detailed consultation with the customer. Based on the individual demands
and technical and business requirements of the customer, a detailed profile of paint
products can thus be generated. Years of experience with a variety of applications
then form the basis for securing an optimal, technically feasible coating. Here, existing
solutions can be modified, or completely new products can even be developed.
The consistent high quality of Mipa industrial paints, meticulously developed
internal and external logistics solutions, as well as the broad base of experience
of MIP AG, all make MIP a partner that covers all your painting needs. Several
A A
domestic and international sales partners can ensure uniform painting of the finished
product, even for widely ramified companies with several production plants or
suppliers.
Pro Mix®-Tinting Systems
These systems enable immediate availability in thousands of different colours starting
from the smallest of amounts, even for completely newly developed paint products.
Especially users who must react very quickly and flexibly to their customer demands
can acquire the necessary coating materials on a "just-in-time" basis.
6. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Online Ticket
Messe Frankfurt Automechanika For visitors About Automechanika Concept A A Print Recommend
Welcome
News
About Automechanika Concept
Concept Automechanika – The
Product groups World's Leading Trade Fair
Facts and figures
for the Automotive Industry
History
Automechanika Supporters The Automechanika is one of the
Automechanika worldwide most successful trade fair brands of
Messe Frankfurt. It is the meeting
Exhibitors and products place for the sector and renowned Newsletter -
for third-country business. register now
Automechanika Events
Visiting Automechanika The Automechanika presents the
entire process chain in the automotive aftermarket, from point-of-sale,
Exhibition grounds via services, to recycling and waste disposal.
Arrival and stay As the world’s biggest trade fair for the automotive aftermarket, the
Automechanika spotlights innovations and solutions in the fields of parts,
What's on in Frankfurt systems, tuning, workshop equipment, bodywork & paintwork, car wash,
IT & Management and the latest automobile services. Productpilot
News
Automechanika
worldwide Product groups
Film
The Automechanika is unique with regard to product-range breadth and
Automechanika
depth. It is split into the following product segments: 2008
Parts & Systems Accessories & Tuning
Repair & Maintenance IT & Management
Service Station & Car
Wash
Login Forgotten your password? Register What is MyAccount? Sitemap Contact Imprint Privacy policy ENG
converted by Web2PDFConvert.com
7. For visitors For exhibitors For journalists For organisers The company
Search
Exhibitions (A-Z)
Congresses and events
Online Ticket
Messe Frankfurt Automechanika For visitors About Automechanika A A Print Recommend
Welcome
News
About Automechanika Repair & Maintenance
Concept The answer to scratches and
Product groups
Facts and figures dents
History The forum for paint shops and body shops
Automechanika Supporters has received a facelift. Visitors to
Automechanika worldwide Automechanika 2010 will find innovations
Exhibitors and products in the areas of paintwork repair, accident
repair, damage repair and claim Newsletter - register
Automechanika Events management in the ultra-modern new Hall now
11 in the western section of the exhibition
Visiting Automechanika centre.
Exhibition grounds Modern equipment is vital for the repair of today’s cars, as demonstrated in the
Arrival and stay impressive special shows and exhibitions of work at Automechanika.
What's on in Frankfurt
The product group in detail:
News Productpilot
1. Workshop equipment and tools: Lifting gear, testing and measuring equipment, tyre
Automechanika installation, work clothing
worldwide 2. Body repairs: Equipment and material
3. Painting and corrosion prevention: Systems, equipment, paints, corrosion Film Automechanika
prevention, auxiliaries 2008
4. Towing service, accident assistance, mobile services: Equipment,
material/consumables
5. Waste disposal and recycling: Systems, equipment
6. Dealership equipment: Shopfitting/shop systems, Sales equipment, office and
warehouse equipment, literature, forms
7. Trailers for car and small commercials, parts for trailers
Ground plan as PDF print version
Ground plan Automechanika 2010 (PDF 270.19 KB)
,
Back to overview